Measurement Computing   Easy to Use | Easy to Integrate | Easy to Support catalog banner

TracerDAQ compatibility with USB-CTR04 & USB-CTR08

Expand / Collapse

TracerDAQ compatibility with USB-CTR04 & USB-CTR08

At the time of release (May 2014) of the new USB-CTR04/08 counter/timer hardware devices, TracerDAQ's rev # is 2.3.  TracerDAQ's Strip Chart app cannot be used (an error will result if sampling is attempted).  However, TracerDAQ's Rate Generator app does support setting the frequency, duty cycle, and initial state of the timer output(s).

A revision to TracerDAQ is planned for later in 2014.  It will allow the Strip Chart app to sample the following channel types:  Event Counter and Digital Inputs.   Hardware paced (synchronous) sampling of these input types will be supported.

Rate this Article:

Add Your Comments

For comments email [email protected].

Article ID: 50532

Last Modified:8/12/2014 3:01:16 PM

Article has been viewed 7,338 times.