Measurement Computing   Easy to Use | Easy to Integrate | Easy to Support catalog banner

LabVIEW does not recognize my MCC DAQ device automatically.

Expand / Collapse
 

LabVIEW does not recognize my MCC DAQ device automatically.


MCC brand DAQ devices have different underlying drivers than NI brand DAQ devices, and thus the steps for getting recognition/usability in LabVIEW differ.  MCC devices will not be recognized by the NI-DAQ utility (instead, before launching LabVIEW, run our InstaCal program to configure the device).   Also note that MCC devices will not be seen in the Measurement & Automation Explorer (MAX).  Instead, install MCC's ULx for NI LabVIEW driver, and then directly open one of MCC's example programs which get installed into the following folder:  \LabVIEW 201x\examples\ULx


Rate this Article:
Tags:

Add Your Comments


For comments email TechSupport@mccdaq.com.

Details
Article ID: 50102

Last Modified:8/24/2012 1:18:15 PM

Article has been viewed 4,153 times.

Options