Measurement Computing   Easy to Use | Easy to Integrate | Easy to Support catalog banner

Measurement Computing Data Acquisition Knowledgebase

Welcome Guest ( )

IOtech USB Communication Mode

Expand / Collapse
 

IOtech USB Communication Mode


Question: Does the IOtech DaqBoard3000/USB use Isochronous endpoints?

Answer:

A device that use Isochronous Endpoints is more concerned about bandwidth and response times then it is with data validity. For example audio and video devices often use the Isochronous USB mode because data is usually transmitted at one rate and if some of the data is corrupt it tends not be as much of an issue especially with today's lossy compression modes. However with data acquisition device data validity is very important so they tend not to use the Isochronous USB mode. Therefore IOtech's PersonalDaq/50 Series, PersonalDaq/3000 Series does not use the Isochronous mode. Instead the modes that are used are Bulk mode for data transfers and Control mode for general I/O.




Rate this Article:
Tags:

Add Your Comments


For comments email TechSupport@mccdaq.com.

Details
Article ID: 50003

Last Modified:10/20/2011 1:07:57 PM

Article has been viewed 5,429 times.

Options